VERIFIED MODEL GUIDE · TASSIMO
Bosch TASSIMO VIVY 2
troubleshooting guide
Decode Bosch TASSIMO VIVY 2 TAS140x status, fill-water R, and Descale Q indicators with safe steps from the official manual.
MODEL-SPECIFIC QUICK ANSWER
Bosch TASSIMO VIVY 2 blinking lights and common signals
VIVY 2 TAS140x uses three identified indicators: Status S, Fill water R, and Descale Q. If a T DISC is not recognized, clean the reading window and smooth the foil; R points to water level or a stuck float; Q means run the manual descaling program. R and Q flashing together with brewing disabled is a machine fault, so contact TASSIMO support.
WHAT'S HAPPENING?
Choose the closest match.
Start with the pattern or symptom you can see. If it isn't listed, use the official support link below.
Something else or unclear?We will not guess at a pattern we have not verified.
Open official supportDIAGNOSTIC CHECK
One quick question.
✓ YOUR NEXT STEP
Try this
A NOTE ON THIS GUIDE
Good advice starts with the right manual.
This page covers documented VIVY 2 light patterns and common symptoms. The source links below point to Bosch support and manuals where available. If your exact pattern is not listed, use official support rather than assuming another model behaves the same way.
Every troubleshooting path links to manufacturer guidance.
Independent guide, no risky repairs. This site is not affiliated with or endorsed by any manufacturer. Product and machine names are trademarks of their respective owners. If a symptom is unclear or persists, contact qualified support.