VERIFIED MODEL GUIDE · Bean-to-cup automatic · North American model

JURA E10 NAA (15815)
troubleshooting guide

Interpret the E10 NAA’s documented ERROR 2/5 and slow-drip guidance without opening the machine or guessing at display codes.

✓ Official source links✓ Safe owner-level checks
JURA E10 NAA article 15815 automatic coffee machine in Ice Blue
Official product photo · Manufacturer

MODEL-SPECIFIC QUICK ANSWER

JURA E10 NAA (15815) common problems and fixes

On the JURA E10 NAA, the manual says ERROR 2 or ERROR 5 after prolonged cold exposure can disable heating for safety: let the machine warm to room temperature. If the message persists, contact JURA. Coffee that drips can be caused by a grind that is too fine; set the grinder coarser, and descale if water hardness was set incorrectly.

WHAT'S HAPPENING?

Choose the closest match.

Start with the pattern or symptom you can see. If it isn't listed, use the official support link below.

Something else or unclear?We will not guess at a pattern we have not verified.

Open official support

A NOTE ON THIS GUIDE

Good advice starts with the right manual.

The manufacturer does not document coded fault-light sequences for JURA E10 NAA (15815). Choose a documented brewing, water-flow, heating, pressure, or maintenance symptom below. Any status indicator shown here appears only when the manufacturer assigns it a specific meaning.

✓
Sources checked for this model

Every troubleshooting path links to manufacturer guidance.

What “verified” means: Each listed signal or symptom is tied to a linked manufacturer source. This is guidance, not a diagnosis of an internal fault.

Last source review2026-10-15

Coverage: Exact North American E10 article 15815 and NAA manual; ERROR 2/5, cold exposure, and slow-flow guidance.

Independent guide, no risky repairs. This site is not affiliated with or endorsed by any manufacturer. Product and machine names are trademarks of their respective owners. If a symptom is unclear or persists, contact qualified support.