VERIFIED MODEL GUIDE · Heat-exchanger espresso · dual pressure gauge and multifunction switch

Profitec PRO 400
troubleshooting guide

Manufacturer-verified PRO 400 guidance for the green low-water LED pattern, dual pressure gauges, tank and first-use flow, warm-up, and safe service boundaries.

✓ Official source links✓ Safe owner-level checks
Front view of the chrome Profitec PRO 400 heat-exchanger espresso machine with blue valve knobs and dual pressure gauge
Official product photo · Profitec

MODEL-SPECIFIC QUICK ANSWER

Profitec PRO 400 blinking lights and common signals

On the PRO 400, a green LED flashing two seconds on and one second off means the water tank is low or not inserted. Refill and reseat it. Let the machine warm up before judging the boiler gauge; use grind and dose checks for extraction pressure, and do not adjust the expansion valve or open the boiler.

WHAT'S HAPPENING?

Choose the closest match.

Start with the pattern or symptom you can see. If it isn't listed, use the official support link below.

Something else or unclear?We will not guess at a pattern we have not verified.

Open official support

A NOTE ON THIS GUIDE

Good advice starts with the right manual.

This page covers documented PRO 400 light patterns and common symptoms. The source links below point to Profitec support and manuals where available. If your exact pattern is not listed, use official support rather than assuming another model behaves the same way.

✓
Sources checked for this model

Every troubleshooting path links to manufacturer guidance.

Independent guide, no risky repairs. This site is not affiliated with or endorsed by any manufacturer. Product and machine names are trademarks of their respective owners. If a symptom is unclear or persists, contact qualified support.